1 of 1

3D Print Shop

Informational Guide on the Duskwork's 3D Print Shop and trivia on previous usage from the Ad Astra Landings.

The Ad Astra Landings flew to Mars with a massive building kit with the design for an industrial, space-ready building printer. During its inauguration on Mars, it was used to create a variety of buildings that originally set up the Ad Astra Development Zone. The buildings it once created out grew it in size and traditional building methods were needed for the newer and larger buildings were needed. Now, the 3D print shops has been re-configured as a sort of massive machine shop, manufacturing PVC pipes, electronics, and structural parts.

The Duskwork's 3D print shop functions much more like the newer Ad Astra Development Zone 3D Print shops with the ability to manufacture PVC Pipes, electronic parts, and structural parts from metals smelted from a Smelting Module. These were also reconfigured to take in power cells instead of being directly connected to the Martian power-grid.

3D Print Shop is a very useful building to have on your plot. You can produce PVC pipes, electronic parts, paper, and structural parts in the 3D Print Shop.

Electrical bits, as they are colloquially known, are usually found as scrap from broken down electronics, they aren't difficult to manufacture on its own though, as wires can be used as its electrical components with a shell of treated iron.

They're useful for tinkering as well, a circuit board, a few electronic bits including a resistor and LED, along with a simple battery offers you one of the simplest circuit designs. Even as I write this document, just below the habitation window that looks out to the red surface, I can see electronic bits scattered across my desk.

- Katherine Collins

Power, electricity, whatever you call it, its everywhere in our increasingly digital world. From your holo-wrist devices, to the fake window screens showing vistas of Earth. You're never really grateful for the power you have until its taken away, much like a clear nose is only appreciated when you have a stuffy nose.

That's why these exist, the battery backups. Installed onto every habitation module, its used in place of any electrical fault and turns on seemingly before any problems arise due to its direct in-line voltage reading. It flicks on once the current dips even a small amount. This recipe isn't exactly approved by the Duskworks company, but if need be, you can overcharge power cells with circuit components and rover wires to a higher capacity.

- Katherine Collins

3D Print Shop

Informational Guide on the Duskwork's 3D Print Shop and trivia on previous usage from the Ad Astra Landings.

3D Print Shop is a very useful building to have on your plot. You can produce PVC pipes, electronic parts, paper, and structural parts in the 3D Print Shop.

Input

Output

Input

Output

Input

Output

Input

Output

Input

Output

Input

Output

Input

Output

- Katherine Collins

Input

Output

- Katherine Collins

Input

Output

3D Print Shop Rarity

3D Print Shop Size